Contact Us

Sloan® SOLIS® Collection

New SOLIS® Flushometers

New SOLIS® Flushometers, part of the Sloan SOLIS Collection, are the industry’s first solar-powered, sensor-activated Flushometers. Sloan SOLIS Flushometers for water closets and urinals provide ground-breaking water efficiency and utilize state-of-the-art photovoltaic technology.

The dual-flush model has two flush cycles: Users can choose the full 1.6 gpf/6.0 Lpf flush for solid waste or the reduced flush of 1.1 gpf/4.2 Lpf for liquid waste. If the user does not press a button, the Flushometer’s Dual-Flush Smart Sense Technology™ takes over and automatically initiates a flush cycle, based on how long the user remains in the sensor range.

SOLIS® Exposed Solar Powered Dual-Flush Water Closet Flushometers

Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for either left or right hand supply with the following features:

  • Solar Powered. The sensor assembly is powered by a solar cell that will harvest power from artificial indoor light, either incandescent or fluorescent light, and use it as the energy source. The solar cell can provide approximately 100% power with 650 Illuminance (lux).
  • Four (4) Size AA Battery Back-up Power Source.
  • “Low Battery” Flashing LED.
  • If the user is present for less than one minute and leaves the sensing zone or chooses the small override button, a reduced flush initiates (1.1 gpf/4.2 Lpf) eliminating liquid and paper waste, saving 1/2 gallon of water.
  • If the user is present for greater than one minute and leaves the zone or chooses the large override button, the full flush initiates (1.6 gpf/6.0 Lpf) eliminating solid waste and paper.
  • Reduces water volume by up to 30% when a reduced flush occurs.
  • PERMEX™ Synthetic Rubber Diaphragm with twin linear filtered bypass and vortex cleansing action.
  • Flex Tube Diaphragm designed for improved life and reduced maintenance.
  • ADA Compliant Sloan Solis® Electronic Dual Flush Solar Powered Infrared Sensor for automatic “No Hands” operation.
  • Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low target detection.
  • Latching Solenoid Operator.
  • Engineered Metal Cover with replaceable Lens Window.
  • User friendly three (3) second Flush Delay.
  • Courtesy Flush™ Override Buttons.
  • Infrared Sensor Range Adjustment Screw.
  • Initial Set-up Range Indicator Light (first 10 minutes).
  • 1” I.P.S. Screwdriver Bak-Chek® Angle Stop.
  • Free Spinning, Vandal Resistant Stop Cap.
  • Adjustable Tailpiece.
  • High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut.
  • Spud Coupling and Flange for 1-1/2” Top Spud.
  • Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set Screw.
  • High Copper, Low Zinc Brass Castings for Dezincification Resistance.
  • Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation.
  • Flush Accuracy Controlled by CID™ Technology.
  • Diaphragm, Stop Seat and Vacuum Breaker molded from PERMEX™ Rubber Compound for Chloramine resistance.
  • 100% of the energy used in manufacturing is offset with Renewable Energy Sources – Wind Energy.